Dynacord DPM 4000 manual Factory Presets

DEVICE DESCRIPTIONS

5.2.11 Factory Presets

When shipped, the selection keys 1 – n are assigned to the corresponding areas 1 – n offering real plug ‘n’ play; the paging station is ready for operation directly after connection and switching the system power ON.

CAUTION: When operating several paging consoles within one installation, setting every single one to its individual, exclusive address (1 - 16) is of major importance.

The paging stations provide the following factory pre-set functions and characteristics:

Parameter		Setting / Description
Address		OFF
Priority		5 (priority for messages)
Name		Untitled DPC4xxx (Type)
Password		Level 1 not protected	Default password level 1: 111
		Level 2 password-protected	Default password level 2: 2222
Pre-gong signal		OFF
Buzzer		ON (acoustic alert signal)
Compressor		OFF
Extension socket	EXT	OFF
Options	2nd alarm key	Not programmed
	Key-lock switch	Not programmed
	PTT-microphone	Call in pre-selected areas, priority 5
Key-assignment	Selection keys 1 – n	Selecting areas 1 – n (key 1 ￿ area 1, key 2 ￿ area 2, ..)
		(not with DPC 4106)
	TALK	Call in pre-selected areas, priority 5
		(DPC 4106: calls in all areas)
	TEXT	Text message in pre-selected areas; text 1, priority 2
		(DPC 4106: text message transmission in all areas)
	GONG	4-stroke gong signal in pre-selected areas, priority 8
		(DPC 4106: gong signal transmission in all areas)
	ALL	Selecting collective call
	CANCEL	Cancel selection / call-pattern
		(not with DPC 4106)
	ON	Switching the system ON / OFF, priority 5
	STOP	Terminates any locally launched signal (gong, text, alarm)
	PROGRAM	Assigns a program to pre-selected areas
		(not with DPC 4106)
	ALARM	DIN-alarm in all areas, priority 9
		(not with DPC 4106)
Special functions		Not programmed

5-42 PROANNOUNCE System User Handbook 1.1