Setting On-screen Display, Setting the Video System | Eiki EIP-3500

Setting On-screen Display

This function allows you to turn the on-screen messages on or off.

Menu operation Page 42

Example: “Options1” screen menu for INPUT 1 (RGB) mode

Description of OSD Display Settings

Selectable items	Description
(ON)	All On-screen Displays are displayed.

	INPUT/VOLUME/AV MUTE/FREEZE/
(OFF)	AUTO SYNC/ENLARGE/ “An invalid
	button has been pressed.” are not
	displayed.

Setting the Video System

The video input system mode is factory preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be re- ceived, depending on the video signal difference. In that case, switch the video signal.

Menu operation Page 42

Example: “Options1” screen menu for INPUT 3 (Video) mode

Description of Video Systems

Selectable items	Description
PAL	When connected to PAL video equipment.
SECAM	When connected to SECAM video equipment.
NTSC4.43	When reproducing NTSC signals in PAL
	video equipment.
NTSC3.58	When connected to NTSC video equipment.

Note

•The video signal can only be set in INPUT 3 or INPUT 4 mode.

•When “Video System” is set to “Auto”, you may not receive a clear picture due to signal differ- ences. Should this occur, switch to the video system of the source signal.

51

Image 55

Eiki EIP-3500 owner manual Setting On-screen Display, Setting the Video System

Contents

EIP-3500 Model No. EIP-3500 Serial No Special Note for Users in the U.K Page Introduction Product Disposal Operation Buttons used in this Contents Reference Important Safeguards Avoid locations with extremes of tem- perature Rest your eyes occasionallyDo not block the intake and exhaust vents Temperature monitor function Using the projector in other countriesOther connected equipment Setup Guide Supplied accessories AccessoriesOptional accessory Projector Part Names and Functions Lamp indicator About the Indicators on the Projector Terminals Projector Rear View CLICK/ENTER button 24·40 Remote Control Insert the batteries Using the Remote ControlUsable Range Inserting the Batteries Quick Start Setup and Projection Adjust the angle Case Close the cover of the storagePocket of the storage case Setting up the Projector Setting up the Projector Projection from behind the Screen Projecting a Reversed Image INPUT/OUTPUT Terminals and Connectable Main Equipment Connections Audio Input Samples of Cables for Connection Supplied Accessories Connecting to a Computer Using the Remote Control as the Wireless Computer Mouse Supplied Accessory Connecting to Video Equipment When connecting video equipment with S-video output terminal When connecting video equipment with video output terminal Controlling the Projector by a Computer When connecting to the LAN terminal using a LAN cable Connecting to an Amplifier or Other Audio Equipment Connecting to a Monitor with RGB Input Terminal Turning the Projector on Connecting the Power CordTurning the Power off Putting Turning the Projector On/Off Image Projection Using the Adjustment FeetHeight Adjust button Rear adjustment feet Undo button Correcting Trapezoidal DistortionPress Keystone button Focus buttons Zoom buttons Auto Focus button Adjusting the FocusAdjusting the Projected Image Size Press on the projector or on the remote control Input buttons Switching the Input ModeAdjusting the Volume Volume buttons AV Mute button Press on the remote controlPress on the remote control to cancel the operation Displaying an Enlarged Portion of an Image Freezing a Moving Image Selecting the Picture ModeSwitching the High Brightness/High Contrast Mode Freeze button Undo button Picture Mode button Iris button Undo button Resize button Resize ModeMOUSE/Adjustment Button //\ Video Menu Items When using the Input 1 or Input 2 modeFollowing shows the items that can be set in the projector Options1 menu Example Picture screen menu for Input 1 RGB mode Menu icons Using the Menu ScreenMenu Selections Adjustments Example Adjusting Bright Single adjustment items To adjust the pro- jected image while viewing itPress or to select the item you want to adjust Press \ or to adjust the item selected Example Setting Menu Position Menu Selections Settings Sub menu Adjusting the Image Picture Adjustment Picture menu Emphasizing the Contrast Adjusting the Color Temperature Description of Iris Settings SRGB SettingSwitching the High Bright- ness/High Contrast Mode Example Picture screen menu for IN- PUT 1 RGB mode RGB Signal Type Setting Example Fine Sync screen menu for Input 1 RGB mode Computer Image Adjustment Fine Sync menuAdjusting the Computer Image Special Modes Setting Checking the Input Signal Auto Sync Adjustment Setting the Resize Mode Using the Options1 MenuChecking the Lamp Life Status Setting the Video System Setting On-screen Display Selecting a Startup and Background Image Eco Mode Selecting the Menu Screen Position Auto Power Off Function Select System Lock on the Op Tions1 menu, then press Example Options1 screen menu for Input 1 RGB modeWhen the System Lock is set System Lock Function Changing the keycode When System Lock is set If You Forget Your Password Setting a PasswordExample Options2 screen menu Example Options2 screen menu Description of Auto Keystone Auto Focus SettingAuto Keystone Setting Example Options2 screen menu Description of Auto Focus Setting the Audio Output Type Speaker Setting Example Options2 screen menu Description of RS-232C Reversing/Inverting Pro- jected ImagesSelecting the Transmis- sion Speed RS-232C Example Options2 screen menu Description of PRJ Modes Description of LAN/RS232C Monitor Output SettingsLAN/RS232C Setting Example Options2 screen menu Description of Monitor Out Confirming the Network In- formation for the Projector Press or to select the desired Language, and then press Using the Language MenuSelecting the On-screen Display Language Press \ or to select the Lan- guage menu icon Cleaning the exhaust and intake vents MaintenanceCleaning the projector Cleaning the lens About the temperature warning indicator Maintenance IndicatorsAbout the lamp indicator Abnormal Regarding the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Computer Computer Compatibility Chart Remote control batteries have run out Troubleshooting Input 2 RGB NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM Specifications Glossary 32,57 Index Japan & Worldwide CanadaEastern Europe Deutschland & Österreich