50

You can use the “Options1” menu to enhance the usage for the projector.

Checking the Lamp Life

Status

You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Menu operation Page 42
Example: “Options1” screen menu for
INPUT 1 (RGB) mode

Description of Lamp Timer (Life)

Note
•It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
•The table above indicates rough estimates in the
case of using only in each mode shown.
•Remaining lamp life changes within the range of
the values shown depending on the frequency at
which “Eco Mode” is switched to “ ” (Eco
mode) and “ ” (Standard mode). (See page
52.)
•The lamp life may vary depending on the usage
condition.
Using the “Options1” Menu
Lamp usage condition
“Life”
Operated exclusively
in Eco mode ( )
Operated exclusively
in Standard mode ( )
Remaining lamp life
100% 5%
Approx. Approx.
3,000 hours 150 hours
Approx. Approx.
2,000 hours 100 hours

Setting the Resize Mode

Depending on the input signal, you can select
the screen image.
Menu operation Page 42
Example: “Options1” screen menu for
INPUT 1 (RGB) mode

Selectable items of Resize Modes

•Normal
•Border
•Dot By Dot*
•Stretch
*Item when inputting RGB signal through INPUT 1 or
INPUT 2
Note
•For details of the Resize mode, see pages 36
and 37.
•You can also press on the remote control to
set the resize mode. (See page 36.)