Setting up the Projector

Projecting a Reversed Image

Projection from behind the Screen

Place a translucent screen between the projector and the audience.

Reverse the image by setting “Rear” in the “PRJ Mode” menu. (See page 59.)

Translucent screen

Audience

Projection Using a Mirror

Place a mirror (normal flat type) in front of the lens.

When the translucent screen is placed between the mirror and audience, set to “Front” in the “PRJ Mode” menu. (See page 59.)

When the mirror is placed on the audience side, set to “Rear” in the “PRJ Mode” menu. (See page 59.)

Set to “Front”

Set to “Rear”

Mirror

Translucent screen

Audience

Audience

Mirror

Info

When using a mirror, ensure that both the projector and the mirror are carefully placed so the projected light does not shine into the eyes of the audience.

Ceiling-mount Setup

It is recommended that you use the optional EIKI ceiling-mount bracket for this installation.

Before mounting the projector, contact your nearest EIKI Autho- rized Projector Dealer or Service Center to obtain the recom- mended ceiling-mount bracket (sold separately).

Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See page 59 for use of this function.

20

Page 24
Image 24
Eiki EIP-3500 owner manual Projecting a Reversed Image, Projection from behind the Screen