Emerson 710NPBA manual TB2

UM581127000	User Instructions
Issue AB, March 22, 2012	Spec. No. 581127000 (Model 710NPBA)

		J1
		J2
RS485 Connection	1B 2B 3B	J3
TB2 1A: RS485+
TB2 2A: RS485-	TB2
RS232 Connection	1A 2A 3A	J4
TB2 1B: CGND
TB2 2B: TXD232
TB2 3B:RXD232
	J8	J10

J1, J2, J3, J4

Distribution Panels FA Inputs

J8

Selects to power Controller from “Battery Power” or not.

	No
	Battery	Battery
Shorting Jumper	Pwr	Pwr
J8
	3	2 1

J10

Battery Monitoring External / Internal (see TB1-4 and TB1-5 for external monitoring points)

External Internal

1	TB1	5		J5
			TP1 TP2 TP3 TP4
TB1-1: Battery Tray FA			TP1 (+) and TP2 (-)	TP3 (+) and TP4 (-)
TB1-2: External Battery FA			System Voltage	System Load
TB1-3: External System FA			Monitoring	Shunt Monitoring
TB1-4: External Battery Monitoring (-)
TB1-5: External Battery Monitoring (+)

1

2

3

Shorting Jumper

J5

CAN

7

8

9

J10

TB1

Wire Size Capacity: 22-12 AWG.

Recommended Torque: 3.0 in-lbs.

FA Signals: Battery applied to the terminal turns in an alarm.

Figure 4-9

System Interface Circuit Card Connector Locations

Page 32 Chapter 4. Troubleshooting and Repair

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.