Emerson 710NPBA manual Pole breaker shown Pole and 4-pole breakers similar

User Instructions	UM581127000
Spec. No. 581127000 (Model 710NPBA)	Issue AB, March 22, 2012
INSTALLING CIRCUIT BREAKER	Alarm jumper connectors.
	Holes to route shunt jumper through (if applicable).
2-pole breaker shown.
3-pole and 4-pole breakers similar.

ON

OFF

Busbar

Apply anti-oxidizing compound to busbar mating surfaces before mounting circuit breakers.

1/4" Hardened

Flat Washer

1/4" Belleville Lock Washer

1/4-20 x 3/4” Bolt (4 places)

Torque to 60 in-lbs.

INSTALLING CIRCUIT BREAKER GUARD

ALARM WIRING (BREAKERS W/OUT SHUNTS) ALARM WIRING (BREAKERS WITH SHUNTS)

Figure 4-6(cont’d from previous page)

Installing a GJ/218 Circuit Breaker (2-Pole, 3-Pole, 4-Pole)

Chapter 4. Troubleshooting and Repair Page 27

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.