User Instructions | UM581127000 | ||
Spec. No. 581127000 (Model 710NPBA) | Issue AB, March 22, 2012 | ||
|
|
|
|
|
|
|
|
| Replacing a TPH Fuse |
|
|
|
|
|
|
| Procedure |
|
|
Note: Refer to Figure
1)Open the distribution cabinet’s front door by turning the latch in the counterclockwise position.
2)Remove the fuse carrier from the mounted fuseholder body by grasping its handle and pulling straight out.
3)Remove the open fuse from the fuse carrier and replace it with the same type and rating.
4)Push the fuse carrier securely back into the mounted fuseholder body.
5)On the distribution panel, locate the open alarm fuse associated with the TPH fuse being replaced. Replace the alarm fuse with the same type and rating. Ensure that a plastic safety cover is installed on the alarm fuse.
6)Close the distribution cabinet’s front door. Turn the latch clockwise to secure the door.
Fuse
Fuseholder Body
Fuse Carrier
Figure
Replacing a TPH Fuse
Chapter 4. Troubleshooting and Repair | Page 23 |
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
