Connecting to the COM Port for Local Management
4.Turn on the modem.
5.With a PC connected to a remote modem, you can configure the switch remotely. To do so, you must configure your PC VT emulation package with these parameters.
Parameter | Setting | |
|
| |
Mode | 7 Bit Control | |
|
| |
Transmit | Transmit=9600 | |
|
|
|
Bits Parity | 8 | Bits, No Parity |
|
|
|
Stop Bit | 1 | Stop Bit |
|
|
|
6.When these parameters are set, the Local Management password screen will display. Refer to the Enterasys Matrix N Standalone Series Configuration Guide for further information.
Figure 3-14 Connecting to a Modem
RESET 
Ä | Ã | Â À |
| CPU |
CONSOLE | PWR |
|
Á
GROUP 3
GROUP SELECT
GROUP 2
GROUP 1
1 | UTP cable & RJ45 connectors | 3 | |
2 | RJ45 COM port | 4 | Local modem |
