Enterasys Networks 2G4072-52 manual Troubleshooting, Using Lanview

4

Troubleshooting

This chapter provides information concerning the following:

For information about...	Refer to page...
Using LANVIEW	4-1
Troubleshooting Checklist	4-4
Overview of Shutdown Procedure	4-5

Using LANVIEW

The 2G4072‐52 uses a built‐in visual diagnostic and status monitoring system called LANVIEW. The LANVIEW LEDs (Figure 4‐1) allow quick observation of the network status to aid in diagnosing network problems.

Viewing the Receive and Transmit Activity

On the 2G4072‐52, you can view the receive and transmit activity on the RX and TX LEDs. However, only one group of 20 ports may be viewed at a time on the 2G4072‐52.

To view the receive and transmit activity on a group of ports, press the GROUP SELECT button (see Figure 4‐1) to step to the group of interest (Groups 1 through 3). Each time the GROUP SELECT button is pressed, the GROUP LED lights up in sequence, indicating which group is selected. The receive and transmit activity for that group of segments is then indicated by the RX and TX LEDs for each port.

N Standalone Series Installation Guide 4-1