Memory Locations and Replacement Procedures
Installing the DIMM
To install a DIMM, refer to Figure B‐4 and proceed as follows:
1.Insert the DIMM down between the connector fingers.
2.Pivot the DIMM downward so the tabs on the connector arms align with the two DIMM alignment notches. With the two connector arms spread outward, push the DIMM down between the connector arms. Then release the two connector arms to lock the DIMM into place.
Figure B-4 Installing the DIMM
Ã
| Â |
| 1 |
|
|
| |
|
|
| Ã |
| Á |
| Â |
|
|
| 3535_01_15 |
1 | DIMM | 3 | Connector arms |
2 | Connector fingers | 4 | SIMM alignment notches (2) |
3.Replace the chassis cover by re‐attaching the provided screws.
