Memory Locations and Replacement Procedures
DIMM Replacement Procedure
The DIMM is considered a field replaceable unit on both the 4G4202‐72 and 4G4282‐49.
Removing the DIMM
Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive electronic equipment.
Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de seguridad para evitar descargas de electricidad estática.
To remove the existing DIMM, proceed as follows:
1.Locate the DIMM connector on the main PC board. Refer to Figure B‐2.
2.Push the connector arms away from the DIMM, as shown in Figure B‐7, enough to release the DIMM from the connector contacts.
Figure B-7 Removing Existing DIMM from 4G4202-72 or 4G4282-49
Á
À
À
Â
1 Connector arms | 2 DIMM | 3 Connector contacts |
3.Pull the DIMM straight up and remove it from the connector contacts.
Matrix
