Enterasys Networks 6H303-48, 4G4282-49, 9034096-02 manual Led, Color State Recommended Action

Using LANVIEW

Table 4‐1 describes the LED indications and provides recommended actions as appropriate.

The terms flashing, blinking, and solid used in Table 4-1indicate the following:

• Flashing indicates an LED is flashing randomly.

•Blinking indicates an LED is flashing at a steady rate (approximately 50% on, 50% off).

•Solid indicates a steady LED light. No pulsing.

•Alternating indicates an LED is flashing in a steady rate other than 50% on, 50% off.

Table 4-1 LANVIEW LEDs

LED	Color	State	Recommended Action
MGMT	None	Off. This module is NOT the	None.
		Management Module.
	Green	Solid. This module is the	None.
		designated Management
		Module.
	Amber	Flashing. This is a	None.
		temporary indication that the
		module is saving data.
CPU	None	Power off.	Ensure chassis has adequate power.
	Amber	Blinking. Module in process	None.
		of booting.
		Solid. Testing.	If the LED remains amber for several
			minutes, contact Enterasys Networks
			for technical support.
	Green	Blinking. Image starts	None.
		running.
		Solid. Functional.	None.
	Red	Solid. Processor in reset.	None.
	Green	Blinking. Indicates that the	None. This state is activated when the
	and	module is in the process of	OFFLINE/RESET switch is pressed for
	Amber	shutting down.	less than 1 second to start the process
			of an orderly shutdown.
			While in this state, do not remove any
			DFE-Gold module from the chassis.

Matrix DFE-Gold Series Installation Guide 4-3