Epson 410 manual DPS MM/SEC Inches PER Second Minute, LCB Label Control Byte

Chapter 4 Designing Labels Using LDS

))))))))))))))))))))))))))))))))))))))))))))

See Table 3 for a list of print speeds, DPS values, and inches per second.higher value slows the printer down and a smaller value speeds it up.

Print Speed

DPS	MM/SEC	INCHES PER	INCHES PER
		SECOND	MINUTE
25	76.8	3.0	180
26	74.2	2.9	174
27	71.7	2.8	168
28	69.1	2.7	162
29	66.6	2.6	156
30	64.0	2.5	150
31	61.4	2.4	144
32	58.9	2.3	138
33	56.3	2.2	132
34	53.8	2.1	126
35	51.2	2.0	120
36	48.6	1.9	114
37	46.1	1.8	108
38	43.5	1.7	102
39	41.0	1.6	96
40	38.4	1.5	90

Table 4

LCB LABEL CONTROL BYTE

The label control number defines the type of label stock that is used.

Continuous Stock: If set to a value of 2, the printer will not activate the gap detector circuit. After all fields are printed, the printer will advance the extra distance in the SPG header element.

Normal Stock (leading edge): If defaulted (value of 0), the printer will detect the trailing edge of the label (the beginning of the gap).

Black Line Stock: If set to a value of 1, the printer will detect the leading edge of a black line.

Blow Hole Stock (Slot-Cut): Use the default value (0) and set software dip switch #4 (^D24) for blow hole stock (see section 5.3).

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual 23