Designing Labels Using LDS

Chapter 4

))))))))))))))))))))))))))))))))))))))))))))

 

CS CHARACTER SPACING

 

The spacing between each character. If this parameter is not used, then the default for the selected character generator (CGN) is used. Bar codes have default spacing according to the indicated multiplier. Multiplying a text string will not multiply the spacing between characters. This element should be used to properly space the characters.

TSP TEXT STARTING POSITION

The starting position of the character in the text string to be used as data. This is useful for allowing several fields to use sections of the same text string minimizing the amount of data transmitted. For example, for the text string 0123456789 a TSP of 5 and a CC (character count) of 2 would print 45. See section 5.3.4 for use of this parameter with clock fields.

CLX CHARACTER CELL LENGTH X DIRECTION

This will override the width of the characters in the selected character generator. This element is used only in special cases, such as drawing lines. It will form an incomplete character.

CLY CHARACTER CELL LENGTH Y DIRECTION

This elements will over-ride the height of the characters in the selected character generator. This element is used only in creating lines.

))))))))))))))))))))))))))))))))))))))))))))

32

410 Operators Manual

Page 38
Image 38
Epson 410 manual TSP Text Starting Position, CLX Character Cell Length X Direction, CLY Character Cell Length Y Direction