Epson 410 manual Printer Statistics, Column Epson emulation 2 inch

Printer Commands Chapter 5

))))))))))))))))))))))))))))))))))))))))))))

24Change SW4: Software dip switch #4. An EEPROM command. Below is the ^AB sequence.

	12345678
	^ABxxxxxxxx
	*******.)Q Not Used
	******.))Q Not Used
	*****.)))Q Not Used
	****.))))Q Not Used
	***.)))))Q1=Auto-size on Power-up, 0=Disable
	**.))))))Q1=Blow-hole Sensing Enable, 0=Disable
	*.)))))))Q1=Enable 2" Epson Emulation, 0=Disable
	.))))))))Q1=Enable 4" Epson Emulation, 0=Disable
29	Printer Statistics:
0	Print statistics to serial port
1	Print statistics on a label
2	Clear the printed labels variable in the statistics
3	Clear the printed inches variable in the statistics

30Change Clock: Use the sequence below to set the time and date of the optional real-time clock:

^D30 (return) HH:MM:SS (return) DD/MM/YY/W (return)

32Reset Machine: Restores printer to power-up settings. Also used to set the EEPROM fields in memory. Section 5.3.

33Display Model and Revision Number.

35	Contrast Window Adjust:
1	60% of Base
2	70% of Base
3	80% of Base
4	90% of Base
5	Base (default)
6	110% of Base
7	120% of Base
8	130% of Base
9	140% of Base

XX36 Adjust Contrast Base:An EEPROM command. The ^AXX is between 10 and 200%. Section 5.3.

38Epson Emulation: This function is no longer supported.

1 40 column Epson emulation (2 inch)

))))))))))))))))))))))))))))))))))))))))))))

90 410 Operators Manual