Epson 410 manual Miscellaneous Printer Commands

Chapter 5 Printer Commands

))))))))))))))))))))))))))))))))))))))))))))

5.3.10 MISCELLANEOUS PRINTER COMMANDS

^A ^D Command

2Text string entry mode: Precedes the text strings that are supplied to the various fields in the label. Text strings must be followed by a carriage return. (Equivalent to ^B)

5Send Printer Status: See section 5.3 (Equivalent to ^E)

29Printer Statistics: The information produced is equivalent to the status label in section

2.1.3.
0	Print statistics to serial port
1	Print statistics on a label
2	Clear the printed labels variable in the statistics
3	Clear the printed inches variable in the statistics
32	Soft Reset: Restores printer to power-up settings.
33	Display Model and Revision Number: Displays important reference numbers
	to the screen.

35Contrast Window Adjust: Adjusts to a percentage of current contrast base. Used for slight variations in paper and should be turned down for ladder style (vertical) bar codes. If this command does not sufficiently lighten or darken the contrast, use the Adjust Contrast Base command (^D36, section 5.3). Values for ^A are shown below:

1	60% of Base
2	70% of Base
3	80% of Base
4	90% of Base
5	Base (default)
6	110% of Base
7	120% of Base
8	130% of Base
9	140% of Base

38Epson Emulation: The 410 printer will emulate an Epson printer in this mode. There is also an Epson emulation on power-up feature as explained in section 5.3.1. The following ^A parameters define mode of operation. This function is no longer supported.

1	40 column Epson emulation
2	80 column Epson emulation

XX55 Select Default Label Layout: Select from the ROM power-up label layout. Only used if you have a special lay-out embedded into ROM. ^A selects which one (1- 8), if more than one are present.

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual 57