Printer Commands Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual92
39 Auto-Size Label: Section 5.3.3.
0Clears the use of auto-size values set by ^A1^D39.
1Uses the values obtained for the variables instead of what the user supplies in the
header of the format file.
2Automatically sizes the label and displays on the screen the values for the size
variables.
3Same as ^A2^D39, but prints the values on a label, instead of on the screen.
40 Clear Commands 41-51.
XX 41 Load number of fields in layout (HFM): Preceded by ^A.
XX 42 Load label width in dots (LXS): Preceded by ^A.
XX 43 Load label height in dots (LSY): Preceded by ^A.
XX 44 Load web size in dots (WEB): Preceded by ^A.
XX 45 Load gap size in dots (GAP): Preceded by ^A.
XX 46 Load print speed (DPS): Preceded by ^A.
XX 47 Load label control byte (LCB): Preceded by ^A.
XX 48 Load number of steps to activate gap detector (AGD): Preceded by ^A.
XX 49 Load number of steps past gap (SPG): Preceded by ^A.
XX 50 Load X direction offset (OFX): Preceded by ^A.
XX 51 Load Y direction offset (OFY): Preceded by ^A.
XX 54 Send Saved Format File to Serial Port: ^A selection which one (1-8). Section
5.3.6.
XX 55 Select ROM Label Layout: Select from the ROM power-up layouts. ^AXX
ranges from 1 to 8.
56 Select User Defined Layout: Signals to the printer the end of the label fields and
precedes the text fields in a format file.
57 Enter Label Format Mode: This tells the printer that information for a label is
following.
XX 58 Process Saved Format: ^A selects which one (1-8). Section 5.3.6.
XX 59 Save Format File: ^A selects which one (1-8). Section 5.3.6.