Chapter 4 | Designing Labels Using LDS |
))))))))))))))))))))))))))))))))))))))))))))
4.3.1A SAMPLE SESSION WITH A LABEL HEADER
This is the label header from the sample label in section 4.2.
4,615,153,,20,30,,70,4<CR>
4- 4 fields following the header
615- Label width (LSX) of 615 (615/154= ~4 inches)
153- Label length (LSY) of 153 (153/154 = ~1 inch)
-No entry in the WEB parameter means default value of 10
20- A GAP between labels of 20 (20/154 = ~.13 inch)
30- Label print speed (DPS) of 30 = 2.5 inches per second (from table)
-No entry for the LCN parameter means default value of 0, normal stock on backing paper
70- The AGD could not be defaulted because the stock was less than 2.3 inches in
length (LSY). This value was produced from
4- SPG also could not be defaulted because of the small size of the stock. Auto- sizing quickly produced this value.
<CR> A carriage return must follow the label header. There were two parameters left that were not entered into the header - OFX and OFY. Because they were not entered, the printer assumes the default values, 0 in their cases. Likewise, if the AGD and SPG were defaulted, the carriage return could have followed the DPS.
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual | 25 |
