Printer Commands

Chapter 5

))))))))))))))))))))))))))))))))))))))))))))

APPENDIX G: QUICK REFERENCE COMMAND SUMMARY

^A ^D Command

2Text string entry mode: Precedes the text strings that are supplied to the various fields in the label (Equivalent to ^B).

3Print Command: Prints a single label or starts the printing of a batch of labels. (Equivalent to ^C)

5 Send Printer Status: (Equivalent to ^E)

11Print a Test Label: (Equivalent to ^K)

12Print a Blank Label: (Equivalent to ^L)

20Change baud rate: An EEPROM command

0 110 Baud

1 150 Baud

2 300 Baud

3 600 Baud

4 1200 Baud

5 2400 Baud

6 4800 Baud

7 9600 Baud

8 19200 Baud

21Change SW1: Software dip switch #1. An EEPROM command. Below is the ^AB sequence:

12345678

^ABxxxxxxxx

*******.Q 1=XON/XOFF Enable, 0=Disable

******.)Q 1=8 Data Bits, 0=7 Data Bits

*****.))Q 1=Echo Enable, 0=Disable

****.)))Q 1=No Parity, 0=Enable Parity

***.))))Q 1=Odd Parity, 0=Even Parity

**.)))))Q 1=Ignore Control Codes, 0=Accept *.)))))))))),

.)))))))))),* Enquiry Response

00 = Control Codes

10 = Text Equivalent

11 = ^ Equivalent

))))))))))))))))))))))))))))))))))))))))))))

88

410 Operators Manual

Page 94
Image 94
Epson 410 manual Appendix G Quick Reference Command Summary