Print Server mode

In Print Server mode, the card performs all print server functions and can service up to 32 queues and eight file servers. No VAP (Value-Added Process) or NLM (NetWare Loadable Module®) is required. When you send a print job from your application, the file server assigns the print job to a print queue. When the corresponding printer is ready, the print server sends the print job to the printer.

The Ethernet Card operates like any Novell NetWare print server, servicing the assigned queues in a round robin fashion. In queues of the same priority, the Ethernet Card services the first job in a queue before those in a lower priority queue. The card also supports encrypted passwords.

This mode provides the highest printing speed while retaining the control, security, and convenience of a NetWare print server.

To use the card in Print Server mode, see page 2-5.

Remote Printer mode

As a remote printer, the Ethernet Card emulates a workstation running Novell’s RPRINTER program, and operates under the control of a Novell NetWare print server. The print server can be either a dedicated workstation running PSERVER or a file server.

At power-up, the interface will attempt to attach to a print server (elsewhere on the network) and act as a particular printer of that print server. To do this, it needs to know which print server to attach to, and which printer of that print server to use. This is similar to the need to specify these parameters in the RPRINTER command line (or to interactively choose them from the RPRINTER program).

Using Novell NetWare

2-3