Before installing the Ethernet Card, see your printer manual for instructions on installing the optional interface card; these will be in the section on using printer options.
Note:
After installing the Ethernet Card, do not connect a cable to the printer’s parallel port until after the card is booted and operating (green status light on, red off). Otherwise, it may not boot properly.
For your own convenience, locate the hexadecimal serial number on the component side of the card and write it here:
The serial number may be necessary for some software installations to identify the Ethernet Card. When installing this card on a Novell, EtherTalk, Windows NT (using TCP/IP), or OS/2 NetBIOS network using the accompanying setup utility software, this number is automatically recorded and displayed.