Notice for Ethernet Card UsersUsing OS/2

If the Ethernet Cards firmware version is 4.00 or below, it does not support NetBIOS over TCP/IP protocol. Therefore use the NetBEUI protocol provided by OS/2 Warp or OS/2 Warp Connect.

The following programs are not supported in the NetBIOS over TCP/IP protocol:

RPRINT, RSTAT-LPT redirection

REMPRT, REMSTAT- pipe support

Using Apple EtherTalk-Renaming Your Printer

When the Card is installed in some printers and you use Epson Namer to rename the printer, the original factory name may reappear in the Select Printer list. Rename the printer again and this name will be properly saved.

Copyright © 1996 by Seiko Epson Corporation,

4006276

Nagano. Japan

EH3-01

Printed in U.K. 96.9-5