Software components
You should now have the following list of files in the
C:\EPNET directory:
ADDPORT.CMD Command to add ports on the server
DELPORT.CMD Command to remove ports from the server
PORTCHG.EXE Program used by the above commands
REMPRT3.EXE Remote Print Service program
REMBEU.EXE Remote Print Service driver
REMSTAT3.EXE Printer status program
Configuring New Printers
This section explains how to configure new printers on a LAN Server for use with remote print service.
Note:
You must have supervisor rights on the server to configure printers and queues.
1.Open an OS/2 full screen command session from your server.
2.Change to the remote print service directory:
CD \EPNET
3.Create ports for your new printers using the ADDPORT command. Choose names that will help to identify the printers, using up to a maximum of 7 characters for each name (for example, EPLASER or PUBSPRT). However, do not use the following characters when assigning a name to the printer:
/\.[I:; I ><+=?*$‘I
4.See your OS/2 documentation for instructions on installing printers and creating queues attached to the server.
Using OS/2