8.Select LAN Hardware Address (Node Address) from the Card Address list. This address matches the one listed under Node Number on the status sheet.
9.Click the Timer button and select the Job Oriented option. Then click OK.
10.Click OK to exit the Add a Network Peripheral Port dialog box.
Note:
You may share the new printer if you wish. To do so, click the Share the Printer on the Network box. The share name defaults to the printer name and can be changed if necessary.
11.Click OK to exit the Create Printer dialog box. A dialog box from the selected model’s device driver appears.
12.Set any
You are `now ready to print.
Installing on Windows NT with TCP/IP Support
Before you can set up the software, the interface card must be installed in the printer and the printer must be connected to the network and turned on.
Requirements
To use the Ethernet Card with LPR (TCP/IP), you need to install the standard TCP/IP software in Windows NT and set the IP address for the Ethernet Card with EPSON Net!.
See the Windows NT User’s Guide for more information on using Windows NT.
Using Windows NT