Using EPSON Zoner

Some EPSON PostScript printers cannot automatically switch between AppleTalk and non-AppleTalk PostScript printing environments. Therefore, you must first configure your printer for the correct printing environment with the AppleTalk PS option in the EPSON Zoner utility. EPSON Zoner automatically displays the AppleTalk PS option if your printer does not have an automatic switching feature.

Follow these steps to configure the AppleTalk PS printing environment and select a zone for your printer:

1.Make sure the Ethernet Card-equipped printer is turned on and ready. After turning on the printer, it will take about a minute for initialization.

2.Insert the EPSON Net! for Macintosh disk into your computer. Double-click the disk icon to open it, if necessary.

3.Create a new folder for EPSON Zoner, if desired, and then copy the utility to your Macintosh.

4.Double-click on the new folder to open it. Next, double-click the Epson Zoner icon. After searching your network, EPSON Zoner displays the following screen:

Using Apple EtherTalk 3-7