Chapter 6

Using OS/2

This chapter explains how to configure and use the Ethernet Card with an IBM OS/2 System. See Chapter 1 for information on hardware installation.

Installing on an OS/2 System

Before you set up the software, you must install the card in the printer, connect it to the network, and turn on the printer.

Requirements

OS/2 Warp and Warp Connect must be installed with NetBEUI protocol and OS/2 Warp Connect must be installed with NetBIOS over TCP/IP protocol. EPSON Net! for OS/2 provides the following programs:

NETBEUI

RPRINT3, RSTAT3-LPT redirection

REMPRT3, REMBEU, RBMSTAT3-pipe support

TCP/IP

RPRINT, RSTAT-LPT redirection

REMPRT, REMSTAT-pipe support

Using OS/2 6-1