Note:

Cl To set up and use the card through a shared OS/2 print queue(s) that will receive print jobs from other workstations, you must install and select either the IBMNULL or MSNULL printer driver. For the DEVICE to connect to, choose a port name from those added in step 3 above (for example, EPLASER).

Cl To connect the card directly to a workstation(s), you must install the proprietary OS/2 printer driver.

5.In the EPNET remote print service directory, create an initialization file called REMPRT.INI. This file is used by the remote print service at start-up and assigns the remote printer names to the device port names. The format of the file is as follows:

<serial number> <device port>

Example:

10900701 EPLASER

10900416 PUBSPRT

6.Edit your STARTUP.CMD file and add the following line at the end:

\EPNET\REMPRT3@REMPRT.INI

This line ensures that the remote print service is initialized each time you start the server. If you wish to start the print service manually, you can execute the REMPRT3.EXE file from the OS/2 command prompt.

7.Use the LAN Server Administration facility (NET ADMIN) to add newly created printers to the list of shared resources.

6-6 using OS/2