A remote printer is a shared printer connected elsewhere on the network, but under the control of a NetWare print server. Traditionally, a remote printer is connected to a network workstation running NetWare’s RPRINTER, but the Ethernet Card can also function as a remote printer.
A status sheet prints each time the Status Sheet button of the Ethernet Card is pushed. If the Card is installed as a print server, the status sheet lists the configurations of the Ethernet Card on each network.
EtherTalk is AppleTalk’s communication protocol governing Ethernet transmissions.
A print spooler is an application that places print jobs or requests in a queue.
TCP/IP (Transmission Control Protocol/Internet Protocol) is a layer of protocols that provides communications between nodes on a network.
ftp is a TCP/IP application protocol for file transfer.
lpd is a TCP/IP remote printing protocol application,
Resetting the Ethernet Card causes it to initialize. You can reset the Ethernet Card in the following ways:
0Switching the EPSON Ethernet
0Using the reset function or buffer clearing operation from the control panel of your EPSON printer.
6 introduction