Entering the password
A password is not required for Ethernet Card operation. However, if you wish to connect to a restricted file server, you will need to use EPSON Net! to enter the encrypted password.
To enter the password, follow these steps:
1.From the NetWare config dialog box, click Password. The following dialog box appears:
2.Type in the same password that you used to log on to the file server and click OK.
e Caution:
Once you make changes to the Ethernet Card, you must wait for at least five minutes before turning off or rebooting your
printer.
Setting the queue polling time interval
Use EPSON Net! to change the interval at which the parallel port(s) check queues for waiting print jobs. To reduce network traffic, you can change the polling interval from 1 second up to 90 seconds. The default setting is 5 seconds.
Using Novell Net Ware