Using the Ethernet Card in Auto Print

Server/Remote Printer Mode

To use the Ethernet Card-equipped printer in Auto Print Server/Remote Printer mode, you must configure it for both print server and remote printer operation. For information on changing the various print server and remote printer settings, see the appropriate sections earlier in this chapter. To select the Auto Print Server/Remote Printer mode, follow these steps:

1.First make sure the host printer is turned on and the interface is connected to the network.

2.Log on to the selected file server with supervisor privileges.

3.Run the EPSON Net! utility.

4.Select the printer you wish to configure and click Open.

5.Click Edit to open the NetWare config dialog box.

6.Click the Auto PrintServer/Remote option button under Operating Mode to select auto switching mode.

2-16Using Novell Net Ware