4.Select the correct serial numbers for the Ethernet Card from the list shown in the dialog box; then click Open. The IP Config dialog box appears on the screen and shows the current IP address.
5.Set the following options in the IP Config dialog box:
0 IP address: determine and assign an IP address
Cl Subnet mask: assign the subnet mask
Cl Auto IP address: set to Off
Note:
Cl The Auto IP address option is a function designed specifically for UNIX users. Windows NT overrides this function, so you can leave it off.
0To prevent the assigned IP address from changing unexpectedly in UNIX, UNIX users should set the Auto IP address option off.
| Serial No. | 104676F9 |
|
| |
|
|
| |||
| IP address |
|
|
| |
| 11.22.33.44 |
|
| ||
|
|
|
|
| |
|
|
|
|
| |
| Subnet mask | 255.255.0.0 |
|
| |
|
|
|
|
|
|
|
|
| ‘Auto IP address | 1 |
|
|
|
| 0 On |
| |
|
| i | 0 Off |
| |
|
|
|
|
|
|
|
|
|
|
|
|
6.After making your settings, click the Save button. To change these settings, repeat steps 3 through 5.