1.From the NetWare config dialog, enter a value, in seconds, from 1 to 90 in the Poll Time (sec) box.
2.Click Save to save your setting changes.
e Caution:
Once you make changes to the Ethernet Card, you must wait for at least five minutes before turning off or rebooting your printer.
Using the Ethernet Card in Remote Printer Mode
Before using an Ethernet Card as a remote printer, you must define it using PCONSOLE on any Novell print server. When defined, the remote printer may have its printer port defined, such as LPT1 or COM2. However, to maintain compatibility, you should define a remote printer as LPT1.
Defining the Ethernet CardBefore using the EPSON Net! setup utility to install the Ethernet Card as a remote printer, you must do the following:
1.From any NetWare workstation, log on to the network with supervisor privileges.
Note:
If you use Net Ware 4.x, menu screens will differ slightly and Bindery Emulation has to be selected. Press F4 to switch between Directory Services and Bindery Emulation.
2.Type PCONSOLE at the DOS prompt.
3.From the Available Options screen, select Print Server Information. Next, select the print server name from the Print Servers list and press Enter.