7.Reboot your system for the installation to take effect.

Note:

To verify that the DLC protocol is installed correctly, check the list of installed Network Software in the Networks dialog box.

Configuring the printer

Follow these steps to configure the printer:

1.Select Print Manager from the Main group.

2.Choose Create Printer from the printer menu at the top of the screen. The Create Printer dialog box appears.

3.Enter a name for the printer in the Printer Name field.

4.Select the printer driver from the Driver pull-down menu.

5.Select Other from the Print To pull-down menu. The Print Destination dialog box appears.

6.Choose (HP Network Port) from the Available Print Destinations list. The Add an HP Network Peripheral Port dialog box appears.

Note:

If HP Network Port does not appear as a choice in the dialog box, then the DLC transport protocol and driver are not installed. Go to the Installation for Windows NT section above for detailed installation instructions.

Enter a name for the port in the Name box.

Note:

The name must not be identical to an existing port, such as LPT1, or any other existing DOS device.

4-2 Using Windows NT