Printer initialization

After Ethernet Card installation, the red and green status lights on the interface flash simultaneously during printer initialization.

Network recognition and normal

operation

At start up, the Ethernet Card checks all active NetWare file servers. While the card is recognizing the network, the red and green status lights flash alternately on and off.

After recognizing the network, the Ethernet Card is ready to send and receive data. In this mode, only the green status light is lit.

Data Transmission light

When the Ethernet Card receives a data packet, it automatically recognizes the protocol of the packet and switches to that protocol mode. When the card sends data, the Data Transmission light (green) is lit.

Status sheet printing

When the Status Sheet button is pressed, the connected printer prints out a status sheet showing the current card configuration.

Status Sheet button

Installing the Ethernet Card

1-5