Epson C82346 Using the Ethernet Card in Print Server Mode, Assigning print queues on a file server

Using the Ethernet Card in Print Server Mode

The Ethernet Card is set to Print Server mode by default, so you don’t have to make any special settings to use it in this mode. However, you must assign a print queue(s) to the card in a file server. See the following section for instructions.

The Ethernet Card can service up to 32 queues and eight file servers in print server mode. See page 2-8 for information about assigning print queues on multiple file servers.

Assigning print queues on a file server

To set up queues on a file server in print server mode, follow the steps below.

1.From any NetWare workstation, log on with supervisor privileges.

2.Run the EPSON Net! utility.

3.After searching the network, the following dialog box appears.Highlight the printer you want to configure from the list and then click Open.

Using Novell Net Ware 2-5