Chapter 5

Using UNIX

The Ethernet Card supports many standard UNIX commands and can be configured from a host computer without using a special setup utility.

Installing and Printing with the Ethernet Card

See the following sections for general information concerning setting up (with TCP/IP) and printing. See page 5-9 for more information about various UNIX systems.

The Ethernet Card is able to function as a remote printer on systems using TCP/IP Ethernet transfer with Berkeley’s popular lpr remote printing protocol, or standard ftp (file transfer protocol).

Setting up the Card

All devices operating with TCP/IP have to be assigned a unique “IP Address node.” This address must be different from that assigned to any other device to which your network is capable of communicating. This unique address acts like a telephone number, enabling all other devices on the network to be able to “dial up” and “talk to” the Ethernet Card, as long as they know its number.

There are conventions surrounding how to make up an IP address, which are discussed later. In the most complex case, where a network is capable of communicating with other networks worldwide, it is necessary to have some of the numbers assigned by an international body that coordinates the numbering.

Using UNIX 5-1