EPSON Stylus Pro GS6000 User’s Guide

The Control Panel

The Control Panel

Buttons, Lights, and Messages

You can check the ink remaining and printer status on the control panel.

Buttons

e

h

a

g

b

c d e f

a. Power button

Turns the printer on or off.

b. Pause/Reset button /

❏Stops printing temporarily, or restarts printing if pressed when the printer is in the pause mode.

❏Clears print data in the printer memory if pressed and held for 3 seconds.

❏The printer returns to the READY state when this button is pressed in the Menu mode.

c. Heater button

❏Selects a heater type. From the right, Pre Heater, Platen Heater, and After Heater are displayed on the LCD panel. Select a heater type, and then press the High Heat button or Low Heat button to change the preset temperature.

❏Returns to the previous level when pressed in the Menu mode.

d. Enter button

Sets the selected parameter in the selected item in the Menu mode. Executes the item if the selected item is for execution only.

e. Paper Feed button /

❏Feeds the roll paper in the forward or reverse direction.

Note:

When AUTO TAKE-UP REEL is ON in the Menu mode, the roll paper cannot be fed in the reverse direction.

❏Changes the parameter in the forward or reverse order when selecting a desired parameter in the Menu mode.

❏The numeric value is decreased or increased during numerical input.

f. Menu button

❏Enters the Menu mode when pressed in the

READY state.

See “Menu Mode” on page 14

❏Enters the Printer Status menu if pressed

during printing.

See “PRINTER STATUS” on page 25

❏When pressed in the Menu mode, a desired menu can be selected.

❏Performs Cleaning (Light) to clean the print heads if pressed and held for 3 seconds.

g. Low Heat button

Decreases the preset temperature of the heater. You can also change the preset temperature while printing.

h. High Heat button

Increases the preset temperature of the heater. You can also change the preset temperature while printing.

11