EPSON Stylus Pro GS6000 User’s Guide

Handling Paper

Using Auto Take-Up Reel Unit

Use the Auto Take-Up Reel Unit to roll up your print so it will not be fed out onto the floor.

A

Turn on the power of the Auto Take-Up

Reel Unit.

B MakeOFF. sure the changeover switch is set to

C Set the front edge of the roll paper so that it reaches the scroller.

See “Setting roll paper” on page 35

D Adjust the position of the scroller using the horizontal adjustment screw to set the roll paper in the center of scroller.

E Make sure that the roll paper is passed over the cushioning roller and then tape the leading edge to the scroller in the center.

Note:

If PAPER OUT error or PAPER SKEW error has occurred when using Auto Take-Up Reel Unit, the roll paper may not be rolled up straight. This phenomenon can be avoided by trimming both of the front edges when setting the roll paper to the scroller.

F Raise the scroller releasing lever.

The scroller raises from the drive unit.

45