Epson GS6000 PAPER SETUP

EPSON Stylus Pro GS6000 User’s Guide

The Control Panel

Item	Parameter	Explanation
AUTO TAKE-UP REEL	ON	Use this setting when using the Auto Take-Up Reel Unit.
		When ON is selected, you cannot feed the roll paper in
	OFF
		the reverse	direction.

Note:

When the Auto Take-Up Reel Unit is not installed, please do not set to ON. By doing so, the product will be unable to function properly.

HEAD FAN	OFF	You can set up the head fan operation. If print blurring
		or dot losses occur, select ON.
	ON
REGULAR CLEANING	OFF	You can set the auto cleaning interval of this printer.
		When more than the set time has passed since the
	1h, 2h, 3h, 4h, 5h, 6h,
		previous print job, the print head is cleaned
	9h, 12h, 18h, 24h
		automatically to prevent it from clogging.
		Note:
		The timer will be reset at the following timing:
		- when turning on the printer
		- when changing the interval of the auto cleaning
		- when performing the cleaning manually
INITIALIZE SETTINGS	EXECUTE	You can return all setting values you have made in the
		Printer Setup menu to their factory set value.
PAPER SETUP
Item	Parameter	Explanation
PAPER TYPE	STANDARD	You can select the paper type to print.
	PAPER No.1 - 30
PAPER SETUP	STANDARD	When you select STANDARD, the default settings are used.
		When you select a number (between 1 to 30), you can
	PAPER No.1 - 30
		register the settings (such as Print Mode, Paper Feed
		Adjust, Head Alignment, Pre Heater, Platen Heater,
		After Heater, M/W Adjustment, Paper Suction, Drying
		Time, Carriage Movement, Print Multiple Layer) or to
		recall these settings you have made. The number you
		select here is displayed on the LCD panel.
		See “Details of PAPER SETUP” on page 21

20