EPSON Stylus Pro GS6000 User’s Guide
Safety Instructions
Setting up the printer
Observe the following when setting up the printer:
❏Do not block or cover the vents and openings in the printer.
❏Use only the type of power source indicated on the printer’s label.
❏Use only the power cord that comes with the printer. Use of another cord may result in fire or electric shock.
❏The printer’s power cord is for use with the printer only. Use with other equipment may result in fire or electric shock.
❏Be sure your AC power cord meets the relevant local safety standard.
❏Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off.
❏Avoid electrical outlets controlled by wall switches or automatic timers.
❏Keep the entire computer system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.
❏Do not use a damaged or frayed power cord.
❏Do not attempt to service the printer yourself.
❏Unplug the printer and refer servicing to qualified service personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the printer; the printer has been dropped or the casing damaged; the printer does not operate normally or exhibits a distinct change in performance.
❏If you plan to use the printer in Germany, the building installation must be protected by a 10 or 16 amp circuit breaker to provide adequate
❏When connecting the printer to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
❏This device has two power systems. There is a risk of electric shock unless the two power cables are unplugged during the maintenance.
Using the printer
Observe the following when using the printer:
❏Do not insert objects through the slots in the printer.
❏Take care not to spill liquid on the printer.
❏Do not put your hand inside the printer or touch the ink cartridges during printing.
❏Do not use aerosol products that contain flammable gases inside or around this product. Doing so may cause fire.
❏Do not move the print head by hand; otherwise, you may damage the printer.
❏Always turn the printer off using the Power button. When this button is pressed, the Power light flashes. Do not unplug the printer or turn off the power to the outlet until the Power light stops flashing.
❏Do not store combustible materials on the platen while performing the heater operation. It could lead to fire.
❏Do not spill flammable liquid over the platen. This could lead to fire.
❏Do not operate the paper lever during initial operation. The print head portion may touch the pressurizing roller portion, and cause a malfunction.
❏Do not drop waste ink when replacing the flushing pad. If waste ink comes into contact with the grid roller, the surface of the grid roller will be damaged, and the media feed function may be affected.
7