Epson GS6000 Ejecting Paper, Cutting roll paper

EPSON Stylus Pro GS6000 User’s Guide

	Handling Paper
Ejecting Paper		D on the paper guide, and cut the roll paper.
			Place a razor blade on the paper cut groove
This section explains how to eject paper after
			Warning:
printing is finished.			w When you hold paper, do not place your
			finger on the paper cut groove;
			mishandling the razor blade may cause a
Cutting roll paper
			cut on your finger or hand.

Cut the roll paper after printing is finished.

wWarning:

When printing is finished, the paper guide is at

high temperature. Wait until the paper guide cools off.

	Make sure the printing or other operations
A are not in progress, and READY appears on
	the LCD panel.
B	Adjust the cutting position by pressing the
	/ button.
	Note:	Note:
		When loading the new roll paper, cut the front
	When AUTO TAKE-UP REEL is ON in the Menu
		edge of the paper if it is not straight.
	mode, the roll paper cannot be fed in the reverse
	direction by using the panel button.
C Open the front cover.

44