Epson GS6000 manual 23

EPSON Stylus Pro GS6000 User’s Guide

The Control Panel

Item	Parameter	Explanation
M/W ADJUSTMENT	LOW A to B	You can improve the print quality by adjusting the print
(Micro Weave		mode you have set.
	MEDIUM A to D
Adjustment)		❏	LOW A, B:
	HIGH A to D		The effect of M/W Adjustment function will be
			minimized. If obvious white lines or uneven print
	EXTRA HIGH A to B
			density appear on printed paper in LOW A, set to
			LOW B.
		❏ MEDIUM A, B, C, D:
			The printing joint between two head passes will
			have a wave form. If obvious white lines or uneven
			print density appear on printed paper in MEDIUM A,
			print samples using the other settings and select the
			best print result from MEDIUM B to MEDIUM D.
		❏ HIGH A, B, C, D:
			Perform printing at a slow speed compared with
			"MEDIUM". Set up this menu when improving the
			print quality compared with "MEDIUM". If obvious
			white lines or uneven print density appear on
			printed paper in HIGH A, change the setting to the
			one with the best print result in HIGH B to HIGH D.
		❏	EXTRA HIGH A:
			Performs "MEDIUM" printing using half of the nozzles
			of the print head. Since only a half of the nozzles is
			used, printing speed becomes half of MEDIUM A to
			MEDIUM D. Set up this menu when improving the print
			quality compared with HIGH A to HIGH D.
		❏	EXTRA HIGH B:
			Performs "MEDIUM" printing using the other half of
			the nozzles of the print head that is used for EXTRA
			HIGH A. Since only a half of the nozzles is used,
			printing speed becomes half of MEDIUM A to
			MEDIUM D. Set up this menu when improving the print
			quality compared with HIGH A to HIGH D.
PAPER SUCTION	HIGH	You can set the suction pressure used to feed the
		printed paper.
	LOW
DRYING TIME	0.0sec to 10.0sec	You can set the ink drying time for each print head
		pass. The range is 0 to 10 seconds. Depending on the
		ink density, paper type or printing speed, the ink does
		not dry soon. In this case, set the drying time longer.
		Note:
		When you set the drying time longer, missing dots might
		occur in the printing.
CARRIAGE	DATA WIDTH	You can set the range that the print head moves while
MOVEMENT		printing.
	PRINTER FULL WIDTH
		❏	DATA WIDTH:
			The print head moves between the print data
			width. This improves the print speed since
			decreasing the transferring range of the print head.
		❏	PRINTER FULL WIDTH:
			The print head moves from origin to the maximum
			paper width. This keeps printing quality the same
			even though the printing size (width) differs.

23