EPSON Stylus Pro GS6000 User’s Guide

Maintenance and Move or Transportation

Maintenance and Move or Transportation

Where to Set up the Printer

Instructions for placing the printer

Observe the following when setting up the printer:

❏Choose a flat and stable location that can support the printer weight (about 200 kg with the stand and Auto Take-Up Reel Unit.)

❏Use only an outlet that meets the power requirements of this printer.

❏Leave enough room for easy operation, maintenance, and ventilation.

See Unpacking and Setup Guide

❏Operate the printer under the following conditions (temperature is 20 to 32°C and humidity is 40 to 60%).

Even when the conditions above are met, you may not print properly if the environmental conditions are not proper for the paper. Be sure to use the printer where the paper conditions are met. See the handling instructions of the paper for more detailed information. Keep the printer away from drying, direct sunlight, or heat sources to maintain the appropriate humidity.

Maintenance Kit

Details of kit contents
a b c

a. Plastic Glove

A plastic glove to be worn when maintaining the printer.

b. Flushing Pad

Spare flushing pad for replacing.

See “Replacing Flushing Pad” on page 59

c. Cleaning Stick

Use the cleaning stick to clean the cleaning wiper or around the print head.

See “Cleaning the cleaning wiper” on page 60

See “Cleaning around the print head” on page 62

Metallic Tray

While maintaining the printer, put the used flushing pad, cleaning stick, or wiper in the metallic tray in order to prevent them from causing any stains on the printer.

53