Epson GS6000 Details of Menu mode, PRINTER SETUP

EPSON Stylus Pro GS6000 User’s Guide

The Control Panel

Details of Menu mode

PRINTER SETUP

Item	Parameter	Explanation
SIDE MARGIN	5mm to 25mm	You can set the margin for left and right side.
	(0.20inch to 1.00inch)
PAPER SIZE CHECK	ON	You can select whether to check the paper width.
		❏	ON:
	OFF
			Check the paper width and top edge of the paper.
		❏	OFF:
			Do not check the paper width and top edge of the
			paper. The printer continues to print even if the
			paper width does not match the data width, and
			the printer may print beyond the paper. Because
			this soils the inside of the printer, we recommend
			you select ON. This may result in a wider blank margin
			at the top of each page.
PAPER SKEW CHECK	ON	When you select ON, if the paper is not straight, PAPER
		SKEW appears on the LCD panel and the printer stops
	OFF
		printing. When you select OFF, a paper align error does
		not occur even if the printed data is out of range of the
		paper, and the printer continues to print.
PRINT NOZZLE PATTERN	OFF	When you select ON, the printer prints the nozzle check
		pattern before printing each print job or the 10th sheet,
	ON: EVERY PAGE
		depending on the setting you have set.
	ON: EVERY 10 PAGES
HEATING TIME	OFF	You can set the length of time to preheat the heaters.
		When more than the set time has passed after turning
	10min to 240min
		on the printer or after printing is finished, each heater
		turns off.
FLUSH ONTO PAPER	YES	You can set up the flushing operation while printing.
		❏	YES:
	NO
			Performs the flushing operation on the page
			margins. The printing speed improves since the
			number of times to return to the flushing box is
			decreased.
		❏	NO:
			Performs the flushing operation to return to the
			flushing box every time the print head goes and
			returns.
FLUSHING FREQUENCY	5PASS	You can set the frequency that the print head returns to
		the flushing box when setting YES in the FLUSH ONTO
	1PASS to 999PASS
		PAPER setting. (When you select 5PASS, the print head
		returns to the flushing box every time the print head
		goes and returns five times.)
PAPER ORIGIN SETUP	0mm to 800mm	You can set the beginning of printing (origin) of the
		horizontal direction.

19