EPSON Stylus Pro GS6000 User’s Guide
Adjust Printing
D Perform initial adjust print.
Note:
If you increase the feeding length, the accuracy of the paper feed adjustment improves; however, it wastes the paper.
1.Press the / button to display PAPER FEED ADJUST, and then press the button.
2.Press the / button to select LINE FEED ADJUST, and then press the button.
3.Press the / button to select the feed length from 100mm, 250mm, or 500mm. Then press the button.
4.Press the button to print initial adjustment.
After printing the initial adjustment, cut the paper.
E Measure the distance between the two pluses in the initial adjustment print using a ruler.
F Set the initial adjustment value.
1.Press the / button to select the measured value in step 4.
2.Press the button to save the initial adjustment value.
G Print a sample pattern.
1.Press the / button to select PRINT
SAMPLE PATTERN, and then press the
button.
2.Press the button to print a sample pattern.
After printing the sample pattern, cut the paper.
H Refer to the illustrations below and check the printing result.
49