EPSON Stylus Pro GS6000 User’s Guide

Handling Paper

Setting roll paper

This section explains how to set roll paper.

A Turn on the printer.

cCaution:

Do not move the paper lever during initial operation. The print head portion may touch the pressurizing roller portion, and cause a malfunction.

PAPER OUT. LOAD PAPER is displayed on the LCD panel.

B Make sure that the Power light is not flashing, and then raise the paper lever.

D Set the roll paper to the paper feed slot.

Note:

If the end of the roll paper is not wound tightly, wind it tightly again, and then load it.

E Pull the roll paper out about 1 m from the front paper feed slot which is located inside of the front cover.

Note:

When loading the new roll paper, cut the front edge of the paper if it is not straight.

See “Cutting roll paper” on page 44

LEVER RELEASED is displayed on the LCD panel.

C Open the front cover.

35