EPSON Stylus Pro GS6000 User’s Guide

Adjust Printing

Adjust Printing

Print head alignment

To prevent deterioration of print quality caused by misalignment of the print head, align the print head before you start printing your data. Head alignment must be set for each print mode.

You can perform print head alignment using:

❏EPSON LFP Remote Panel

❏printer’s control panel

Usually perform print head alignment using EPSON LFP Remote Panel. If you do not have a computer or software, use the printer’s control panel.

Note:

Align the print head for the paper width loaded in the printer. Use the paper which width is the same as the paper that you actually use for printing.

Aligning the print head using EPSON LFP Remote Panel

A Make sure that the roll paper is loaded in the printer.

B Check the position of the head height adjustment lever. The result of the print head alignment differs according to the position of the lever.

See “Head height adjustment” on page 42

C

Select Media Adjustment in the EPSON

LFP Remote Panel main dialog box.

D Click Bidirectional Alignment.

Follow the on-screen instructions to align the print heads. For detailed information, refer to the EPSON LFP Remote Panel online help.

Aligning the print head using the control panel

A Turn on the printer and load the roll paper.

B Check the position of the head height adjustment lever. The result of the print head alignment differs according to the position of the lever.

See “Head height adjustment” on page 42

47