Power Supply

ProblemSolution

Power is not being supplied.

T h e P O W E R l i g h t does not go on.

T h e P O W E R l i g h t

comes on

briefly and

then

goes

off. The

light

stays off even

when

the

power is

switched

on again.

The power cable may be loose or not properly plugged into the electrical outlet. Turn off the printer and check the power cable connections between the printer and the electrical outlet.

The power switch is off. Turn on the switch.

Power is not being supplied to the electrical outlet. Check to see if the electrical outlet is controlled by an outside switch or automatic timer; if so, use a different outlet. Plug another electrical device into the outlet to determine whether the outlet is working properly.

The voltage may not be correct for your printer. Check the label on the printer’s rear panel and confirm that the printer’s voltage rating matches the voltage of your electrical outlet. If the voltages do not match, unplug the printer and contact your Epson dealer immediately. Do not reconnect the power cable to an electrical outlet. Refer to 1-15.

The problem may lie with the electrical outlet. Plug another electrical device into the outlet to determine whether the outlet is operating properly.

Troubleshooting 7-3