Printing

ProblemSolution

Printed characters are not what you expected (continued).

The wrong international characters are being printed.

The characters printed are smaller than expected.

The wrong international character set is selected. If your application program is capable of sending control codes, specify the desired international character set using ESC R n. Refer to 9-31.

You can also select the international character set by changing the DIP switch setting. To do this, turn off the power and set DIP switches 1-6, 1-7 and 1-8 to the correct positions for the character set you want. Refer to 3-23.

The condensed mode may be set. Set the printer on line and press the CONDENSED button once or twice to cancel the mode. The beeper sounds twice to indicate that the condensed mode is canceled. Refer to 3-19.

If your application program is capable of sending control codes, you can cancel the condensed mode by sending the DC2 code to the printer. Refer to 9-24.

7-8 Troubleshooting