Skip Over Perforation

By changing the setting of DIP switch 2-3, you can set skip over perforation to ON or OFF. If this feature is ON when using continuous paper, a one-inch margin is provided between the last printed line on one page and the first printable line on the next page. This feature is very convenient if your application program does not provide for top and bottom margins.

If you adjust your loading position correctly, you can get half of the margin at the bottom of one page and half at the top of the next page, as shown in the following illustration.

DIP SW2-3 OFF (Skip over perforation OFF)

•23456769:;<=>?@ABCDEFGHIJKLMNOPQRSTWW

3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVwK

456789:;<=>?@ABCDEFGHIJKIMNOPQRSTWWKY

•56789:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ

6789~;~=>?W3CDEFGHIJKfrMNOPQRSTWWKYZC

- - - - - - - - - - - - - - - _ - - - _ _ 789:;~=~?@ABCDEFGHIJKLMNOPQRSTWWKYZ~\ • 89:;<=~?@ABCDEFGHIJKLMNOPQRSTUVWKYZ[\J

9:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZC\3^ :;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ[\J--

4B ;c=>?SABCDEFGHIJKI&lNOPQRSTUWKYZ[\]--’

DIP SW2-3 ON (Skip over perforation ON)

*23456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUW

3456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVW

456789:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKY

m56769:;<=>?@ABCDEFGHIJKLMNOPQRSTWWKYZ

6789:;<=>?@ABCDEFGHIJKL&lNOPQRSTWWYZC

3-10 Using the Printer